Six Sigma is a highly disciplined process that focuses on developing and delivering near-perfect products and services. Sigma is a statistical term that measures how far a given process deviates from perfection. The central idea behind Six Sigma is that if you can measure how many defects you have in a process, you can systematically figure out how to eliminate them and get as close to zero defects as possible. Manufacturing companies around the world are implementing the Six Sigma process to:
Improve customer satisfaction
Maximize process efficiencies
Increase competitive advantage and market share
Save millions of dollars in operating expenses
Jack Welch, former CEO of GE, says that Six Sigma is "the most important initiative GE has ever taken...it is part of the genetic code of our future leadership."
Many companies implementing Six Sigma use a process called DMAIC (define, measure, analyze, improve and control) for continued improvement. DMAIC is a systematic, scientific and fact-based process that eliminates unproductive steps. It helps companies fulfill the vision of Six Sigma.
New computer-aided inspection (CAI) technologies can drastically improve the "measure" and "analyze" part of the DMAIC process, making them valuable tools in the Six Sigma approach to quality.
The Bottleneck
It is well documented that three-dimensional verification is frequently the slowest, most expensive and disruptive element of the manufacturing process. Advances in CAD/CAM/CAE and digital technologies continue to improve other manufacturing processes, but the dimensional inspection bottleneck has remained intact.
Manufacturing companies spend a significant percentage of their resources to develop 3D CAD models that define the design of a part. But, the efficiencies of the 3D CAD model do not carry over into the verification and inspection processes.
Designers break the 3D models into 2D drawings and apply constraints to determine product configuration. Geometric design and tolerance (GD&T) assigned in 2D drawings are then evaluated in the 3D models, yielding a complex web of dependencies. Changing and maintaining the 2D drawings requires considerable effort, and the process contains a great deal of duplication.
Today's Inspection Process
Most inspection today is done by contact metrology, the science of physically determining an object's dimensions. Contact metrology includes everything from simple manual tools to coordinate measurement machines (CMM).
A CMM system consists of a platform on which the desired measurement object is fixed. The station has an arm where a touch probe is attached. The machine makes direct contact with the object being measured at a rate of approximately one contact measure per second. CMM systems vary in size depending on the objects they need to measure. They are slow, large, expensive and susceptible to environmental temperature variation.
The CAI Alternative
CAI aims to remove the bottleneck of dimensioning verification in the manufacturing process. It is not intended to replace metrology, but rather to introduce a faster and easier process for directly comparing as-built parts with their 3D CAD definition.
There are two widely used non-contact measurement systems for CAI: 3D scanners and laser trackers. 3D scanners are commonly used for range finding. They work by projecting a laser beam onto an object and measuring its reflected image with a positioning sensor. 3D scanners are fast and can be mounted onto an existing CMM.
Laser tracking is also known as interferometry. A laser tracker calculates the relative distance between points along a single axis. By knowing the wavelength of the emitted light and the distance between fringes, the distance between two points can be computed.
Non-contact laser measurement systems collect data much faster than CMMs. It is common to collect tens of thousands of points per second. With massive amounts of data being transmitted to a computer for processing, software based on complex mathematics and sophisticated algorithms must be used to interpolate the data quickly.
The CAI Wish List
The new wave of CAI systems combine fast, non-contact measurement machines with software that aligns, compares, evaluates and reports the deviation between as-built parts and the 3D CAD reference model. Market research has determined that customers want the following attributes in a CAI solution:
Accuracy of 0.001mm to 0.005mm
Speed of more than 10,000 points per second
Portbility for in-process measurement
An open system for rapid conversion to standard or native CAD formats
Automatic align, compare, evaluate and report process
Repeatable setup, process and results
Ease of use so it can be deployed on the shop floor by inspectors with no CAD training
Go/no-go displays that enable an automatic pass/fail check with pre-defined tolerances
Geomagic Qualify 4.0 from Raindrop Geomagic is the first product to fulfill the software side of the CAI equation. It takes advantage of the latest technology in 3D scanners, but also works with CMMs and laser trackers.
Geomagic Qualify follows a simple workflow: alignment, compare, evaluate and report. Align is the function of placing the CAD reference model and scanned physical parts into the same coordinate system. Comparison can be done directly to the 3D CAD model or on 2D sections. Evaluation analysis data is visualized on the 3D model by color plots or on 2D sections by precision dimensioning. Reports are generated automatically in customized or pre-formatted standard files, including HTML, Microsoft Word and Excel, PDF and VRML.
One key advantage of Geomagic Qualify is the embedding of knowledge capture. The CAD reference model is always being trained. The user process is recorded and organized in a knowledge management panel called "Manage Automation." This panel is created by the software and can be edited by users. Once the workflow is defined and reports customized, the process can be executed with the push of a button. This is ideal for inspecting many as-built parts against a single CAD reference model.
All 3D All the Time
One company making the move from CMM to CAI is Schneider Electric's Square D brand. The new inspection process at Square D will make 3D a part of the entire design and manufacturing cycle.
Rus Emerick, staff designer for Square D, uses a recent example to illustrate how 3D inspections can change the way the company operates.
When Square D designers needed to inspect a plastic molded cover for a circuit breaker, they discovered the part had 1,295 dimensions that would have to be inspected.
"Using the old methodology we would have had to pay $12.50 per dimension on a 2D drawing and measure it with a CMM machine, only to find that there were only two out of tolerance," he says. "With Geomagic Qualify, I can quickly see the two features that don't match the CAD model. I don't have to measure all 1,295 dimensions."
Using the old method would have taken three weeks, as opposed to two days with Geomagic Qualify, Emerick says.
"The faster the product is approved, the faster it can be built and the faster it can be shipped," he says. "Time is money."
Fulfilling the CAI Promise
CAI software will become a mainstream application and an essential part of the digital product development cycle. Pushing quality inspection into earlier phases of the development cycle will speed product development and ensure greater quality. As supplier networks continue to expand and products are increasingly differentiated according to quality, how well a company implements the inspection process can be a make or break factor in the marketplace.
CAI is beginning the same way as most new technologies. The innovators are relatively small companies without extensive marketing resources to penetrate deeper into large manufacturing operations. System integrators and consultants are needed to customize the new CAI technologies and integrate them into existing digital manufacturing processes. Raindrop Geomagic is providing consulting services and working in cooperation with hardware developers to provide the type of turnkey CAI solutions that the marketplace is seeking.
CAI can eliminate the requirement for generating 2D drawings for parts and tools, which can save hundreds of engineering hours. It places the verification and inspection process into the 3D digital realm, where it can be fully integrated into existing CAD/CAM/CAE processes. This will allow manufacturers to reap greater benefits from their CAD/CAM/CAE investments and bring them closer to the promise Six Sigma.
The biggest obstacle to CAI acceptance is the inertia caused by familiar ways of doing things. Unwillingness to take a risk is always a deterrent to innovation. But, the difference between CAI and earlier digital processes is that there is much less risk. CAI technologies complement, rather than replace, the CAD/CAM/CAE systems manufacturers already have in place. Early adopters of CAI such as Square D will get a head start in establishing processes whose benefits will only multiply with time.
Fuente: http://www.geomagic.com/en/about_us/media/articles/CAI.php
No hay comentarios:
Publicar un comentario